联系济南太阳集团y8722ycc|集团欢迎您 / Contact us

济南太阳集团y8722ycc|集团欢迎您

客户咨询热线

0531-85767688

售后热线:15668327566

联系基地:山东省 德州市协同发展产业园D06幢

槽式电缆桥架的四点性能

文章来源:/   作者:电缆桥架厂家发布时间:2023-03-20 浏览次数:13

返回:常见问题
槽式电缆桥架作为电力工程行业中备受欢迎的产品,槽式电缆桥架在市场上的销量一直处于一路的状态,那么槽式电缆桥架的性能如何呢?下面山东电缆桥架厂家为您分析:
As a popular product in the power engineering industry, the sales volume of trough cable trays in the market has always been advanced. What about the environmental performance of trough cable trays? The Shandong cable bridge manufacturer will analyze for you:
槽式电缆桥架的四点性能
Four Environmental Protection Performance of Trough Type Cable Tray
1、成分内不含Ph、cr、Hg等重金属;
1. The ingredients do not contain heavy metals such as Ph, cr, Hg, etc;
2、归属于厚膜型材料,触变性能好,经充分搅拌后,少加或不加稀释剂,即可涂装施工。由于镀锌固体分含量高达77%,固线器,一次无气喷涂可获得较高的膜厚,减少了有机溶剂的挥发量,降低干燥能耗,这些均有利于环境保护。
2. Belonging to a thick film type material, it has good thixotropic performance. After full stirring, coating can be carried out with little or no diluent. Due to the high solid content of zinc plating up to 77%, high film thickness can be obtained by using a wire bonder and one time airless spraying, reducing the volatilization of organic solvents, and reducing drying energy consumption, all of which are beneficial to environmental protection.
3、经过测试证明:绝大多数镀锌的溶剂和稀释剂内不含甲苯、酮类、卤代烃等毒性大的有机溶剂。
3. Tests have shown that the vast majority of zinc plating solvents and diluents do not contain toxic organic solvents such as toluene, ketones, halogenated hydrocarbons, etc.
山东电缆桥架厂家
4、电缆桥架厂家槽式电缆桥架是替代热浸镀锌、电弧(热)喷锌的好材料,对减少三废、降低能耗,提高环境保护的社会效益的作用就更加明显。
4. Cable tray manufacturers' trough type cable tray is a good material to replace hot dip galvanizing and electric arc (hot) spraying zinc, which has a more obvious effect on reducing three wastes, reducing energy consumption, and improving the social benefits of environmental protection.
槽式电缆桥架是以金属为主要原材料进行加工制作的,因此工人在生产中要注意佩戴手套,防止被金属割伤;有条件的厂家好为工人配备护目镜和工作服,这样对工人的保护更。桥架的生产大多是按照设计图纸和客户要求进行加工制作,所以生产前要仔细阅读图纸,按照要求调整生产设备上的数值,防止出现尺寸等不合格的产品出现。
Trough type cable trays are manufactured using metal as the main raw material, so workers should pay attention to wearing gloves during production to prevent being cut by metal; Conditional manufacturers are better equipped with goggles and work clothes for workers, which provides more comprehensive protection for workers. The production of the bridge is mostly carried out according to the design drawings and customer requirements, so it is necessary to carefully read the drawings before production, adjust the values on the production equipment as required, and prevent the appearance of unqualified products such as dimensions.
在槽式电缆桥架的加工制作过程中,除了对工人有要求外,生产设备也是注意事项之一。电缆桥架厂家用电是任何生产都要特别注意的事项,生产设备的线路也属于用电的范围,启动机器前好进行彻底检查,尤其是隔段时间没有使用的设备,更要注意其开关和线路。关注我们,了解更多事项!
In addition to the requirements for workers, production equipment is also one of the precautions during the processing and manufacturing of trough type cable trays. Cable bridge manufacturers should pay special attention to the safety of electricity use in any production, and the safety of production equipment wiring also belongs to the scope of electricity safety. Before starting the machine, it is necessary to thoroughly inspect, especially for equipment that has not been used for a period of time, and pay more attention to the safety of its switches and wiring. Follow us , learn more!
工程案例 / Case Show
  • 济南火车站 济南火车站
  • 曲阜孔子文化会展中心 曲阜孔子文化会展中心
  • 山东工艺美院 山东工艺美院
  • 公安厅服务展示 公安厅服务展示