1. Electricians and welders of fiberglass cable trays must hold operation certificates issued by professional exams.
2. Welders should strictly inspect the electric welding machine entering the site for any leakage, short circuit, poor contact, etc. before use, otherwise it cannot be put into use and welding with defects is strictly prohibited. At the end of the work, the power should be cut off in a timely manner and the welding machine should be covered with waterproof materials.
3. The construction shall be carried out in strict accordance with the safe operation procedures for cable tray, and no operation against rules or use of electric welding machine without electrician is allowed. Welders are not allowed to use electric welding machines without operating certificates.
4. The components of fiberglass cable trays such as electric hammers and on-site lighting fixtures must be wired by electricians and tested for normal operation before use. If the site is damp, operators must wear insulated shoes and gloves, otherwise they are not allowed to use it. It is prohibited to replace fuses with aluminum wire, copper wire, iron wire, etc.
5. Electricians must strictly follow the safety technical operating procedures for fiberglass cable trays and must not operate in violation of regulations. In the cross construction of civil engineering and other projects, it is necessary to achieve "one slow, two look, and three passes". Any unsafe factors discovered during construction should be promptly contacted by the construction manager, and construction can only be carried out after they are resolved. Dangerous construction is not allowed.
6. When entering the construction site of fiberglass cable trays, one must wear a safety helmet and dress according to regulations. Without wearing a safety helmet, one is not allowed to enter the construction site. Entering the construction site, it is not allowed to use various electric machinery, tools, and other equipment without permission. On site management personnel must firmly establish a safety mindset of putting safety first and prevention first. When there is a conflict between production progress and construction safety, safety must be achieved first, and staff must not command construction in violation of regulations.
This article is contributed by cable tray in Shandong Province. For more information, please click: Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned