During the installation process of the bridge, there are high requirements for its construction, and different construction methods have different requirements. This requires implementation based on its characteristics. So, what are the different methods for installing the bridge
(1) The bridge and accessories shall be cut mechanically or manually, and flame welding or electric welding shall not be used for cutting.
(2) The connection between the slot box and slot box of the bridge, between the slot box and the cover plate, and between the cover plate and the cover plate should be tight and firm.
(3) The safe distance between the bridge and the heat meter and pipeline during installation must be ensured.
(4) The installation of bridge support columns should be at an equal distance, and the mobile pump truck dosing device should be neatly arranged and meet the design requirements. The installation of the bridge should be horizontal and vertical, and be neat and orderly.
(5) The welding part of the bridge during installation should be well protected against corrosion and coated with oil.
(6) After the installation of the cable tray, spray its universal number on both sides of the cable tray at a certain distance.
(7) The cable support in the cable fire layer, trench, and tunnel under the distribution board. The hanger should be arranged in a reasonable manner to ensure that the cables are neat and avoid conflicts.